74HC07AP

BUY 74HC07AP https://www.utsource.net/itm/p/973363.html
HEX BUFFER OPEN DRAIN

Instructions for Use:

1. Supply Voltage (V_CC):

   • The 74HC07AP operates within a supply voltage range of 2.0V to 6.0V. Ensure that the power supply is stable and within this range to avoid damage to the device.

2. Input Levels:

   • For a valid low input, the voltage should be less than or equal to 0.8V.
   • For a valid high input, the voltage should be greater than or equal to 2.0V.

3. Output Levels:

   • When the output is low, the voltage will typically be around 0.1V with a maximum of 0.4V when sourcing 4 mA.
   • When the output is high, the voltage will be at least 2.4V when sinking -0.4 mA.

4. Leakage Current:

   • The input leakage current is typically 0 μA but can range from -1 μA to 1 μA.
   • The output leakage current is typically 0 μA but can go up to 50 μA when the output is high.

5. Propagation Delay:

   • The typical propagation delay time is 9 ns, with a maximum of 22 ns at 5V and 25°C.

6. Power Dissipation:

   • The maximum power dissipation per package is 100 mW. Ensure that the device is not subjected to excessive power dissipation to prevent overheating and potential damage.

7. Handling:

   • Handle the 74HC07AP with care to avoid static damage. Use appropriate ESD protection measures during handling and installation.

8. Mounting:

   • Ensure that the device is properly mounted on the PCB with correct orientation and soldering. Follow standard PCB assembly practices to ensure reliable operation.

9. Storage:

   • Store the 74HC07AP in a dry, cool place away from direct sunlight and sources of heat to maintain its performance and longevity.