SN74LS86AJ: 马来西亚的首选 Utsource Holding Company Limited

详情

BUY SN74LS86AJ https://www.utsource.net/itm/p/1088234.html
OCTAL, HEX, AND QUAD D-TYPE FLIP-FLOPS WITH ENABLE

Parameter	Symbol	Min	Typ	Max	Unit
Supply Voltage	V_CC	4.75	-	5.25	V
Input Low Voltage	V_IL	0.0	-	0.8	V
Input High Voltage	V_IH	2.0	-	V_CC	V
Output Low Voltage	V_OL	0.0	-	0.4	V
Output High Voltage	V_OH	2.4	-	V_CC - 0.5	V
Propagation Delay Time (Low to High)	t_PLH	-	9	15	ns
Propagation Delay Time (High to Low)	t_PHL	-	9	15	ns
Power Dissipation	P_D	-	-	100	mW
Operating Temperature Range	T_A	-40	-	85	°C
Storage Temperature Range	T_STG	-65	-	150	°C

Power Supply:
- Connect V_CC to +5V and GND to 0V.
- Ensure the power supply is stable and within the specified range (4.75V to 5.25V).
Input Signals:
- Apply input signals such that they fall within the valid logic levels:
  - Low: 0V to 0.8V
  - High: 2.0V to V_CC
Output Signals:
- The output will be:
  - Low: 0V to 0.4V
  - High: 2.4V to V_CC - 0.5V
Propagation Delay:
- The device has typical propagation delays of 9ns for both low-to-high and high-to-low transitions, with a maximum delay of 15ns.
Power Dissipation:
- Ensure that the total power dissipation does not exceed 100mW to avoid overheating.
Temperature Considerations:
- Operate the device within the temperature range of -40°C to 85°C.
- Store the device in an environment between -65°C and 150°C.
Handling:
- Handle the device with care to avoid damage from electrostatic discharge (ESD).
- Follow standard ESD protection guidelines during handling and installation.
Mounting:
- Mount the device on a PCB using standard surface mount technology (SMT) or through-hole techniques.
- Ensure proper soldering and alignment to prevent mechanical stress on the pins.
Testing:
- Test the device under normal operating conditions to ensure it meets the specified performance parameters.
Compliance:
- Ensure compliance with all relevant safety and regulatory standards for your application.

(For reference only)