1/2“方手枪式风动冲击扳手

Kobe IW500 1/2" Impact Wrench

The Kobe IW500 1/2" square drive air impact wrench is suitable for the rapid removal or installation of threaded fasteners. The housing is manufactured from a single piece of aluminium, for increased strength and durability. The housing has a rubber shroud around the square drive to protect the surface of the work piece from accidentally impacts and a rear bumper to protect the tool when it?s not in use. Reverse gear is selected easily at the press of a button conveniently located above the 10 position throttle control. The short body length allows access into hard to reach areas.

IW500 - 1/2" Impact Wrench

One piece aluminium housing, 10 position power regulator and thumb switch for reversing.

Specifications:
Bolt capacity: 16mm.
Torque: 325 Nm.
Air inlet thread: 1/4" NPT.
Air hose size (ID): 8mm.
Air pressure: 90PSI.
Air consumption: 4CFM*.
Overall length: 191mm.
Weight: 2.4kg.
Noise level: 88dB(A).
Vibration: 4.2m/s2.
For a complete range of 1/2'' drive impact sockets see product group KEN-583.

*Based on 15 second cycle per minute average use.