| 
							Model | 
						
							FP 9000 | 
					
					
						| 
							General | 
					
					
						| 
							Number of amplifier channels | 
						
							2 | 
					
					
						| 
							Peak total output all channels driven | 
						
							9000 W | 
					
					
						| 
							Peak output voltage per channel | 
						
							170 V | 
					
					
						| 
							Max output current per channel | 
						
							70 A peak | 
					
					
						| 
							Max output power (all channels driven) | 
					
					
						| 
							2 ohms | 
						
							4500 W | 
					
					
						| 
							4 ohms | 
						
							3000 W | 
					
					
						| 
							8 ohms | 
						
							1600 W | 
					
					
						| 
							16 ohms | 
						
							800 W | 
					
					
						| 
							Max output power bridged | 
					
					
						| 
							2 ohms | 
						
							Not recommended 1 | 
					
					
						| 
							4 ohms | 
						
							9000 W | 
					
					
						| 
							8 ohms | 
						
							6000 W | 
					
					
						| 
							16 ohms | 
						
							3200 W | 
					
					
						| 
							Performance | 
					
					
						| 
							THD 20 Hz - 20 kHz at 1 W | 
						
							<0.1% | 
					
					
						| 
							THD at 1 kHz and 1 dB below clipping | 
						
							<0.05% | 
					
					
						| 
							Signal to Noise Ratio | 
						
							>112 dBA | 
					
					
						| 
							Channel separation (Crosstalk) at 1 kHz | 
						
							>70 dB | 
					
					
						| 
							Input impedance | 
						
							20 kOhm | 
					
					
						| 
							Common Mode Rejection (CMR) | 
						
							>54 dB, 20 Hz - 20 kHz | 
					
					
						| 
							Gain, Sensitivity and Limiters | 
					
					
						| 
							VPL, selectable per ch | 
						
							170, 140, 116, 100, 80, 66, 54 V | 
					
					
						| 
							VPL, when bridged 2 | 
						
							340, 280, 232, 200, 160, 132, 108 V | 
					
					
						| 
							Voltage Peak Limiter mode (per ch.) | 
						
							Hard / Soft | 
					
					
						| 
							Amplifier gain selectable (all channels) – rear-panel switches 2 | 
						
							23, 26, 29, 32, 35, 38, 41, 44 dB | 
					
					
						| 
							Default gain | 
						
							38 dB | 
					
					
						| 
							Level adjustment (per channel) | 
						
							Front-panel potentiometer, 31 position detented from -inf to | 
					
					
						| 
							Connectors and Buttons | 
					
					
						| 
							Input connectors (per ch.) | 
						
							3-pin XLR, electronically balanced | 
					
					
						| 
							Output connectors (per ch.) | 
						
							Neutrik speakON / binding post | 
					
					
						| 
							Output bridge mode | 
						
							A+B - Ch. A is signal input source. A+B, C+D - Ch.’s A and C are input source | 
					
					
						| 
							NomadLink network | 
						
							On board, 2 x RJ45 connectors IN and OUT | 
					
					
						| 
							Intelligent fans (on/off) | 
						
							Yes, depending on presence of output signal | 
					
					
						| 
							Power on/off and Remote enable on/off | 
						
							Individual switches on front-panel | 
					
					
						| 
							Cooling | 
						
							Dual fan, front to rear airflow, no filter required, temperature controlled speed | 
					
					
						| 
							Front-panel user interface | 
					
					
						| 
							Common | 
						
							NomadLink Network; Power Average Limiter (PAL)4; Power on | 
					
					
						| 
							Per channel | 
						
							Signal present / High-impedance; -10 dB and -4 dB output signal;Voltage Peak Limiter (VPL); Current Peak Limiter (CPL): Very High Frequency (VHF); High temperature; Fault; Mute | 
					
					
						| 
							Power | 
					
					
						| 
							Operating voltage, 230 V / 115 V nominal 3 | 
						
							130-265 V / 65 -135 V | 
					
					
						| 
							Minimum power-up voltage, 230 V / 115 V | 
						
							171 V / 85 V | 
					
					
						| 
							Power Average Limiter (PAL) 4 | 
						
							Yes | 
					
					
						| 
							Soft-start / Inrush Current Draw | 
						
							Yes / max. 5 A | 
					
					
						| 
							Mains connector | 
						
							230 V CE: 16 A, CEE7; 115 V ETL: 30 A Twist lock | 
					
					
						| 
							Dimensions | 
					
					
						| 
							Dimensions | 
						
							W: 483 mm (19”), H: 88 mm (2 U), D: 396 mm (15.6”) | 
					
					
						| 
							Weight | 
					
					
						| 
							Weight | 
						
							12 kg (26.4 lbs) | 
					
					
						| 
							Finish | 
					
					
						| 
							Finish | 
						
							Black painted steel chassis with black painted steel / aluminum front |