Manufacturer: Balluff
Inductive sensor
BES Q40KFU-GNX35F-S92G-EEX
BES0300
1) Active surface
NAMUR (analog) 35.00 mm
Non embeddable
Connector, M12x1-S92
General attributes :
Approvals / Conformity : CE
FM
cCSAus
EAC
Basic standard : IEC 60947-5-6
EN 61241-11
EN 61241-0
EN 60079-26
EN 60079-11
EN 60079-0
Enclosure Type per IEC 60529 : IP67
Explosion proofness : BVS 05 ATEX E 162 X
Ex II 1 D Ex iaD 20 T 90 ?C / Ta: -20 ?C
to +70 ?C
Connection to approved intrinsically safe
circuits with max. values U=15 V/I=50 mA
Ex II 2G Ex ia IIC T6 / Ta: -20 ?C bis
+70 ?C
Function indicator : Yes
Polarity reversal protected : No
Power indicator : No
MTTF (40?C) : 2930 a
Electrical attributes :
For use only with suitable approved switching amplifier.
Connection type : Connector
Current draw damped max. : 1.0 mA
Current draw undamped min. : 2.10 mA
Eff. operating voltage Ue DC : 8.2 V
Electrical version : DC, direct current
Internal capacitance Ci max. : 220 nF
Internal inductivity Li max. : 0.710 mH
Operating voltage UB max. DC [V] : 9.0 V
Operating voltage UB min. DC [V] : 7.7 V
Power Pi max. : 120.0 mW
Rated insulation voltage Ui : 75 VDC
Rated series resistance Rv : 1000 Ohm
Switching freq. f max. (at Ue) : 100 Hz
Switching function : NAMUR (analog)
Mechanical attributes :
Ambient temperature Ta max. : 70 ?C
Ambient temperature Ta min. : -20 ?C
Assured operating distance Sa : 28.00 mm
Connector type : M12x1-S92
Depth : 66.0 mm
Eff. operating distance Sr : 35.00 mm
Height (small side) : 40.0 mm
Housing material : PPE / PPS
Mech. installation condition : Non embeddable
Rated operating distance Sn [mm] : 35.00 mm
Sensing face material : PPE
Switching distance diff. max. : 15.00 %
Width (long side) : 40.0 mm
Remarks : The operating manual document number 844836 must be followed.For further information on MTTF/B10d, please refer to the MTTF / B10d Certificate.Specification of the MTTF value and the B10d value do not represent any binding qualityand/or life expectancy guarantees.
