74LS05: Top Choice in United States (USA) Utsource Holding Company Limited

Description

BUY 74LS05 https://www.utsource.net/itm/p/907344.html
STANDARD GAIN HORN; WAVEGUIDE SIZE: WR229; FREQUENCY RANGE: 3.30-4.90; GAIN: 20 dB

Below is the parameter table and instructions for the 74LS05 IC:

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Supply Voltage	V_CC	4.75	5.0	5.25	V
Output High Voltage	V_OH	2.7	3.5	5.0	V	I_OL = -0.4 mA
Output Low Voltage	V_OL	0.0	0.1	0.4	V	I_OL = 8.0 mA
Input High Voltage	V_IH	2.0	3.5	5.0	V
Input Low Voltage	V_IL	0.0	0.8	1.5	V
Propagation Delay Time	t_pd	9	15	22	ns	V_CC = 5V, T_A = 25°C
Power Dissipation	P_D	-	100	-	mW	Per Package
Operating Temperature Range	T_A	-55	25	125	°C

Power Supply:
- Connect the V_CC pin to +5V and the GND pin to ground.
- Ensure that the supply voltage is within the specified range (4.75V to 5.25V).
Input Connections:
- Connect the input pins (1, 2, 4, 5, 9, 10) to the signals you want to invert.
- Inputs should be within the valid logic levels (V_IL or V_IH).
Output Connections:
- The output pins (3, 6, 8, 11, 12, 13) will provide the inverted signal.
- Ensure that the load connected to the output does not exceed the maximum current ratings.
Unused Pins:
- If any input pins are not used, they should be tied to either V_CC or GND to prevent floating inputs.
Propagation Delay:
- Be aware of the propagation delay time (t_pd) when designing your circuit to ensure proper timing.
Temperature Considerations:
- The operating temperature range is from -55°C to 125°C. Ensure that the IC is not exposed to temperatures outside this range.
Power Dissipation:
- The maximum power dissipation per package is 100 mW. Design your circuit to avoid exceeding this limit.
Storage and Handling:
- Store the IC in a dry place and handle it with care to avoid damage from static electricity.

By following these instructions and parameters, you can effectively use the 74LS05 IC in your digital circuits.

(For reference only)