Description
BUY 74HC564N https://www.utsource.net/itm/p/1109629.html
Octal D-type flip-flop; positive-edge trigger; 3-state; inverting - Description: Octal D-Type Flip-Flop; Positive-Edge Trigger; Inverting 3-State ; Fmax: 137 MHz; Logic switching levels: CMOS ; Number of pins: 20 ; Output drive capability: +/- 7.8 mA ; Power dissipation considerations: Low Power or Battery Applications ; Propagation delay: 14@5V ns; Voltage: 2.0-6.0 V
| Parameter |
Symbol |
Min |
Typ |
Max |
Unit |
| Supply Voltage |
VCC |
2.0 |
- |
6.0 |
V |
| Input High Level Voltage |
VIH |
3.15 |
- |
VCC |
V |
| Input Low Level Voltage |
VIL |
0 |
- |
0.85 |
V |
| Output High Level Voltage |
VOH |
VCC - 0.1 |
- |
VCC - 0.5 |
V |
| Output Low Level Voltage |
VOL |
0 |
- |
0.25 |
V |
| Input Leakage Current |
IIL |
-1 |
- |
1 |
μA |
| Output Leakage Current |
IOL |
-1 |
- |
1 |
μA |
| Propagation Delay Time |
tpd |
- |
12 |
- |
ns |
| Power Dissipation per Package |
PD |
- |
- |
100 |
mW |
Instructions for 74HC564N
Supply Voltage (VCC):
- Ensure the supply voltage is within the range of 2.0V to 6.0V to avoid damage to the device.
Input Levels:
- For a valid high input, the voltage should be at least 3.15V.
- For a valid low input, the voltage should not exceed 0.85V.
Output Levels:
- The output high level voltage (VOH) will be close to the supply voltage (VCC).
- The output low level voltage (VOL) will be close to 0V.
Leakage Currents:
- Input and output leakage currents should be kept within ±1μA to ensure reliable operation.
Propagation Delay (tpd):
- The typical propagation delay time is 12ns. This is the time it takes for the output to respond to a change in the input signal.
Power Dissipation:
- The maximum power dissipation for the package is 100mW. Ensure proper heat dissipation if operating near this limit.
Handling Precautions:
- Handle the device with care to avoid static damage. Use appropriate ESD protection measures.
- Avoid exceeding the maximum ratings specified in the parameter table.
Pin Configuration:
- Refer to the datasheet for the specific pin configuration and function of each pin.
Operating Temperature Range:
- The device is typically rated for operation over a temperature range from -40°C to +85°C. Ensure the ambient temperature stays within these limits.
Storage and Packaging:
- Store the device in a dry, cool place to prevent moisture damage.
- Follow recommended storage and handling guidelines provided by the manufacturer.
For more detailed information, refer to the full datasheet of the 74HC564N.
(For reference only)
More detail about Utsource Holding Company Limited
