Tenmars TM-16E AC Clamp Meter

Application

• Measuring voltage over 20V as it may cause human body electricity conduction.
• Measure AC power. 
• Operating Environment: Indoor use. This instrument has been designed for using in an environment of pollution degree 2.
• Operation Altitude: up to 2000m.
• Operating Temperature & Humidity: 5℃ ~ 40℃,below 80%RH.
• Storage Temperature & Humidity: -10℃ ~ 60℃, below 70%RH.
• Fingers should hold under the protection guard of test probe.
• Category: CATⅡ 600V for body. CATⅢ 600V for clamp.

Features

• Make sure that all the test leads are disconnected from the meter’s terminal for current measurement.

• Maxim input for DCV or ACV is 600V.

• Before taking any in circuit resistance measurement, remove power from the circuit being tested and discharge all the capacitors. If a reading is over range, the message “OL” will be displayed.

Specifications

• Display: 3½digits LCD with maximum reading 1999, Plus decimal point, unit symbol indication.
• Overload Indication: LCD will show a “1” in the left highest position.
• Low Battery Indication: Replace battery as LCD display “ ”.
• Sampling Rate: 2 times per second for digital display.
• Jaws opening:30mm
• Max conductor size:30mm
• Dimension: 195mm(L)x64mm(W)x30mm(H).
• Weight:about 240g. (Including battery)

Continuity
Range	Buzzer	Max. Open Voltage	Overload Protection
	below 100!&	-1.6VDC	500V rms