Description
Non-contact safety door switch DSR series
DSR is compact and suitable for various environments, making security doors more convenient
The non-contact safety switch DSR series adopts the working principle of magnetic induction. It is a sensor with an actuator. Even if there is a certain installation offset, it can still output stably and is widely used in equipment door monitoring.
Features
.png)
Application Scenario
Sliding door installation scene
Non-contact induction, low wear and dust-free, high cleanliness application scenarios.
The hinged door is offset and still has stable output
Technical Parameters
| model |
DSR-R12O |
| Implementation Standards |
ENISO14119、ISO13849 |
| Switching voltage |
≤30VDC |
| Switching current |
≤100mA |
| Safety contact switching distance |
Switching distance (OFF→ON):≤9mm
disconnect distance (ON→OFF): ≥20mm |
| Number of contacts |
2NO (door is open) |
| Dimensions |
40mm×26.5mm×13mm |
| Material |
PC+10% glass fiber |
| Security Level |
ISO13849PLe |
| Enclosure protection grade |
IP67 |
| Connection |
Lead wire type, cable length 3m |
| Operating temperature |
-30℃~60℃ |
| Storage temperature |
-30℃~60℃ |
| Vibration resistance |
10~55Hz, 1mm (EN60947-5-3) |
| Impact resistance |
30g, 11ms (EN60947-5-3) |
| Ambient temperature |
85%RHthe following |
| weight |
Switch: about 120g; Actuator: about 16g |
Characteristic data curve
Lead Definition
More detail about ELITE SENSOR SYSTEM SDN BHD
Malaysia
