Description
BUY SN74HC04N DIP14 https://www.utsource.net/itm/p/9273909.html
| Parameter |
Value |
Unit |
| Package Type |
DIP14 |
- |
| Logic Family |
74HC |
- |
| Supply Voltage (Vcc) |
2.0 to 6.0 |
V |
| Operating Temperature |
-40 to +85 |
°C |
| Input Current (IIL) |
±1.0 |
mA |
| Output Current (IOH/IOL) |
±7.0 |
mA |
| Propagation Delay Time |
18 |
ns |
| Power Dissipation |
100 |
mW |
Instructions for SN74HC04N DIP14
Power Supply Connection:
- Connect pin 7 (GND) to the ground.
- Connect pin 14 (Vcc) to the positive supply voltage between 2.0V and 6.0V.
Input Connections:
- Connect input pins (pins 1, 3, 5, 9, 11, 13) to your signal source or logic levels.
- Ensure input voltages do not exceed Vcc or go below GND.
Output Connections:
- Connect output pins (pins 2, 4, 6, 8, 10, 12) to the load or next stage of the circuit.
- Outputs can drive up to ±7mA.
Handling Precautions:
- Handle with care as ESD (Electrostatic Discharge) can damage the component.
- Use proper anti-static measures when handling.
Storage Conditions:
- Store in a dry place away from direct sunlight and extreme temperatures.
Mounting:
- Ensure correct orientation during PCB assembly.
- Apply sufficient heat during soldering but avoid overheating.
Testing:
- After installation, verify connections and test functionality under specified operating conditions.
(For reference only)
More detail about Utsource Holding Company Limited
