ADG794BRQZ SSP16: Top Choice in United States (USA) Utsource Holding Company Limited

Description

Parameter	Description	Conditions	Min	Typ	Max	Unit
Supply Voltage (VDD)	Operating supply voltage range		1.6		3.6	V
Leakage Current (ILK)	Leakage current at logic inputs	VDD = 3.6V, TA = 25°C		1		nA
Input Capacitance (Cin)	Input capacitance	f = 1 MHz, VDD = 3.6V		4		pF
Output Capacitance (Cout)	Output capacitance	f = 1 MHz, VDD = 3.6V		4		pF
On-Resistance (RON)	Resistance when switch is on	VDD = 3.6V, TA = 25°C	0.9		1.5	Ω
Off-Resistance (ROFF)	Resistance when switch is off	VDD = 3.6V, TA = 25°C		10^9		Ω
Switching Time (tSW)	Time to switch from off to on or vice versa	VDD = 3.6V, TA = 25°C		10		ns
Power Consumption	Total power consumption	All switches ON, VDD = 3.6V		27		μW

Power Supply Requirements:
- Ensure the supply voltage (VDD) is within the specified range of 1.6V to 3.6V.
Installation and Handling:
- Handle with care to avoid damage to pins.
- Ensure proper orientation during installation to match the pin configuration.
Operating Temperature:
- The device is designed to operate optimally at room temperature (25°C). For extended temperature ranges, consult the datasheet for specific limitations.
Signal Routing:
- Keep signal paths as short as possible to minimize parasitic capacitance and inductance effects.
Power-On Sequence:
- Apply VDD before any input signals to ensure stable operation.
Switch Control:
- Use appropriate control signals to turn switches on and off. Ensure that switching times are considered for timing-sensitive applications.
Decoupling Capacitors:
- Place decoupling capacitors close to the power pins to reduce noise and improve stability.
Testing:
- Test the device under typical operating conditions to verify correct functionality. Monitor parameters like leakage current and on-resistance to ensure performance specifications are met.

For detailed information beyond this summary, refer to the official datasheet provided by Analog Devices.

(For reference only)