EntryPass
NE4800 Networked Multi-Elevator control panel
NE4800 Networked Multi-Elevator control panel

 

NE4800 Networked Multi-Elevator control panel

TH COMMUNICATION SDN. BHD. flag
Category: EntryPass Available
Purchasable on official site
For more information, visit our official website at thcomm.com.my
Visit Official Site Contact Us
Description

Networked Multi-Elevator Controller
EntryPass EP.NE4800.PSU 


New Concept of lift controller
with onboard network communication port not only provides
the basic connectivity but also security, speed performance,
improve stability and management of multi-elevator lift car
in a single spot therefore greatly increasing value and cost effectiveness
 
Support up to massive floors access
The lift controller shall able to support up to 512 floors access
via passive I/O board expansion sharing among lift floors access

OSDP Wiegand converter
The lift controller shall able to provide up to 8 units of
wiegand reader interface with OSDP converter connecting to a lift controller

Passive Output Board
Flexibility and easy to assign any range or individual port among the passive
I/O expension board that serving up to 128 floors access each to any elevator car

Multiple elevetor cars
Provide cost effectiveness on the controller implementation cost by supporting up to 4 units elevator cars



Dynamic I/O Assignment (Reader / Output)
Multiple Wiegand Group for various card formats
10 sets of Facility Code
Support 128bits AES Encryption for communication
Adopted standard OSDP Protocol
Support a maximum of 30,000 card holder,80,000 event transaction
Support a maximum of 4 elevator cars, with each elevator serving up to 128 floors
Support a maximum of 512 controllable floors
Flexible I/O Partitioning


 
                                                                POB Passive Output Board


Expanding I/O availability, each controller control up to 32 floors, when multiple controllers connected
by single daisychained line, it canforms a maximum of 128 floors control per line.





                                                            OSDP Wiegand Converter 

                                    OSDP Reader Interface, connecting up to a  maximum of 2 readers.


 




POB Hardware Specification
 
Specification Description
MCU STM32F072C8T6 Cortex M0 @ 48MHz
MCU RAM 64 KB
MCU ROM 16 KB
Operation Voltage +12V
Max Current consumption @12V
(All relays are ON)		 POB(32O4I) : 410mA
Min Current consumption @12V POB (32O4I ): 25 mA
Output type POB: Max 32 number of SPDT type Connections
Output connection spec Refer to Relay switching characteristic
Input type POB (32O4I): Max 4 number of supervised inputs
Supervised Input channels bias voltage +12V (internal pull up)
Communication ports One Isolated and protected RS485,One CAN bus
Processing power extension SODIMM 204 pin to support A20 core board

More detail about TH COMMUNICATION SDN. BHD.
TH COMMUNICATION SDN. BHD.
TH COMMUNICATION SDN. BHD.
Contact Us flagMalaysia