Description

TSi Single-Phase Voltage Regulator / Power Line Conditioner

TSi-200 Single-Phase Automatic Voltage Regulator & Line Conditioner

The TSi-200 Single-Phase Automatic Voltage Regulator is designed to provide stable regulated AC voltage for sensitive electronic and industrial equipment. It helps reduce the impact of voltage fluctuation, sags, swells, spikes and electrical noise on connected loads.

This single-phase voltage stabiliser is suitable for high-end audio equipment, process controllers, laboratory instruments, security and surveillance systems, LED lighting systems, automation panels and other sensitive loads where clean and stable voltage is important.

System Type Single-phase voltage regulation

Function Automatic voltage stabilisation

Purpose Protect sensitive electronic equipment

Application Power conditioning without battery backup

Product Overview

Many single-phase electronic systems are affected by poor voltage quality. Even when the equipment does not immediately fail, unstable supply voltage can create nuisance faults, reduced performance, overheating, inaccurate measurement or shorter component life.

The TSi-200 Single-Phase unit helps maintain a stable supply to the connected load. It is useful where the main issue is poor voltage quality and the load does not require battery backup during a full power outage.

Positioning: Single-phase automatic voltage regulator and line conditioner for sensitive electronics, control systems, audio equipment, LED systems and industrial automation loads.

Existing Product Image

The existing product image is retained below for use as the main visual reference on the webpage.

TSi-200 single-phase automatic voltage regulator and line conditioner

Key Benefits

Stable Output Voltage

Helps regulate incoming voltage before it reaches sensitive connected equipment.

Improved Equipment Reliability

Reduces nuisance faults and abnormal behaviour caused by unstable mains voltage.

Power Line Conditioning

Helps reduce the effect of voltage fluctuation, spikes, surges and electrical noise.

UPS Alternative

Suitable when voltage correction is required but battery backup is not needed.

Single-Phase Load Protection

Ideal for equipment powered from single-phase AC supply.

Better Equipment Life

Stable voltage helps reduce stress on power supplies, controllers and electronic boards.

Power Quality Problems Addressed

Power Issue	Possible Impact	How the Voltage Regulator Helps
Low Voltage / Voltage Sag	Equipment reset, weak performance, relay dropout, controller faults and power supply stress.	Boosts low incoming voltage to support a stable output voltage.
High Voltage / Voltage Swell	Overheating, insulation stress, nuisance alarms and shorter equipment life.	Reduces high incoming voltage to a safer regulated level.
Voltage Fluctuation	Unstable operation, inconsistent performance and repeated equipment faults.	Corrects voltage movement before it reaches the connected load.
Surges and Spikes	Damage or disturbance to sensitive electronics and power supplies.	Provides line conditioning and surge / spike mitigation depending on configuration.
Electrical Noise	Measurement instability, audio noise, communication errors or controller disturbance.	Reduces conducted noise reaching sensitive equipment.

Recommended Applications

High-End HiFi Audio Equipment

Stable voltage can help improve operating consistency and protect sensitive audio electronics.

Critical Process Controllers

Supports stable operation of controllers, instruments, sensors and automation panels.

Laboratory and Test Equipment

Useful for precision equipment affected by unstable supply or electrical noise.

Security and Surveillance

Helps stabilise supply to CCTV systems, access control, alarm panels and monitoring equipment.

Outdoor LED Systems

Useful for LED traffic lights, LED street lamps and signage systems exposed to unstable mains.

Industrial Electronic Loads

Suitable for single-phase machines, printers, packaging controls and automation electronics.

Why Use a Single-Phase Voltage Regulator?

Single-phase sensitive equipment is often installed directly from building supply or local distribution boards. When that supply is unstable, the equipment may experience repeated faults or reduced life. A single-phase voltage regulator provides a practical way to stabilise the supply before it reaches the equipment.

Reduces the effect of voltage fluctuation on sensitive single-phase loads.
Helps prevent nuisance trips, resets and repeated controller faults.
Protects power supplies, electronic boards and control circuits from abnormal voltage stress.
Useful where voltage quality is the issue, but battery backup is not required.
Can be installed near the load or upstream of a small group of sensitive loads.
Can be combined with power quality monitoring for verification and troubleshooting.

Voltage Regulator vs UPS

Requirement	Voltage Regulator / Line Conditioner	UPS
Correct unstable voltage	Yes, this is the main function.	Yes, depending on UPS type.
Run during full power outage	No, unless combined with a separate backup system.	Yes, based on battery capacity.
Battery maintenance	No battery required.	Battery replacement and maintenance required.
Best application	Voltage fluctuation, sag / swell correction and power conditioning.	Critical loads that must continue during power failure.
Typical cost approach	Usually more cost-effective when backup is not required.	Required where uptime during outage is mandatory.

Practical note: Use a voltage regulator when the main problem is unstable voltage. Use a UPS when the equipment must continue running during a power outage. For very critical loads, both may be used together.

Project Selection Guide

Correct sizing is important. The regulator should be selected based on actual load current, starting current, connected equipment type and incoming voltage variation.

Confirm nominal voltage and input voltage variation range.
Confirm load kVA, running current and starting / inrush current.
Confirm whether the load is purely electronic, motorised, inductive or mixed.
Confirm required regulated output voltage and acceptable tolerance.
Confirm whether surge protection, bypass or alarms are required.
Confirm installation location, ventilation, cable entry and maintenance access.
Measure voltage behaviour before final sizing for critical applications.

Integration with Monitoring Systems

For critical loads, it is useful to verify both the incoming supply and regulated output. This helps prove whether the voltage regulator is correcting the actual site problem and whether any remaining issues are caused by other power quality events.

Monitor voltage before and after the regulator where verification is required.
Use PQube 3 for detailed power quality event investigation.
Use power meters for load current, kW, kWh and demand measurement.
Use IoTWatt 4.0 for energy trends, equipment load profile and event correlation.
Support digital energy audits, EECA reporting and reliability improvement projects.

TSi Single-Phase Voltage Regulator Supply and Sizing

Saturn Pyro supports TSi single-phase voltage regulator and power line conditioner applications for high-end audio systems, process controllers, laboratory equipment, security systems, LED lighting, automation loads, sensitive electronics and power quality improvement projects in Malaysia.

Enquire Now

More detail about Saturn Pyro Sdn Bhd