Description
Powerside PQube 3 Rugged Pole-Mount Package
PQube 3 Rugged Pole-Mount Power Quality Analyzer
The Powerside PQube 3 Rugged Pole-Mount package is a ready-to-install outdoor power quality monitoring solution designed for distribution line monitoring, utility feeders, outdoor switchboards, substations, remote electrical assets and industrial sites where a normal panel-mounted analyser is not practical.
It combines the PQube 3 Power Analyzer with a rugged IP44 polycarbonate enclosure, stainless steel pole-mount brackets and straps, quick-connect terminal blocks, self-powered operation from the measured voltage, battery backup, CT inputs and optional modem / GPS readiness for remote monitoring.
Application
Distribution line and outdoor feeder monitoring
Enclosure
IP44 polycarbonate indoor / outdoor package
Current Channels
8 channels for split-core or flexible CTs
Backup
Up to 1 hour UPS battery backup
Overview
The Rugged Pole-Mount package is built for power quality monitoring points that are outside a normal control panel. It is suitable for pole-mounted distribution assets, outdoor metering points, substations, utility feeders, solar farms, water infrastructure, remote pumps, industrial incoming feeders and other locations where the analyser must be installed close to the electrical supply.
Once mounted and wired, the PQube 3 automatically detects the nominal frequency, voltage and wiring configuration. When connected to a network or modem, it can send power quality reports and event notifications directly to users without requiring installed software.
Positioning: Rugged pole-mounted Class A power quality monitoring package for distribution line monitoring, remote feeder monitoring and outdoor PQube 3 deployment.
Key Benefits
Designed for Pole Mounting
Pre-packaged in a rugged enclosure with stainless steel pole-mount brackets and straps.
Outdoor-Ready Enclosure
IP44-rated, vented, corrosion-resistant polycarbonate enclosure for rugged monitoring locations.
Fast Field Wiring
Quick-connect terminal blocks simplify voltage, CT, I/O and power wiring during site installation.
Self-Powered Operation
The analyser can be powered from the measured voltage, reducing separate instrument power requirements.
Battery Backup
Up to 1 hour backup helps capture disturbance events and complete reports during interruptions.
Remote Monitoring Ready
Modem-ready model supports data collection where wired Ethernet is not available.
Power Quality and Energy Monitoring
The pole-mount package uses the PQube 3 Power Analyzer as the monitoring engine. This provides Class A power quality measurement, energy monitoring, waveform capture, event recordings, trend data, reports and communication options for remote power quality visibility.
| Monitoring Area |
Capability |
Practical Value |
| Distribution Power Quality |
Records sags, swells, interruptions, harmonics, flicker and other PQ events. |
Understand supply disturbances affecting downstream customers or equipment. |
| Feeder Energy |
Measures energy, power, power factor, current, voltage and demand-related behaviour. |
Supports feeder loading, energy use and long-term trend analysis. |
| Waveform Records |
Captures event waveforms and graphs for power quality investigations. |
Gives engineers clear evidence of the disturbance waveform and timing. |
| Current Channels |
Eight current channels for split-core CTs or flexible CTs depending on configuration. |
Allows monitoring of multiple feeders or line currents from one package. |
| Additional I/O |
Relay output, analogue inputs and digital input. |
Correlate PQ events with external alarms, breaker status or process signals. |
Installation Features
Stainless Steel Brackets
Designed for secure pole mounting using stainless steel brackets and straps.
Conduit / Gland Ready
Installer can drill holes for conduits or cable glands based on the site cable-entry layout.
Padlockable Door Clasps
Supports controlled access to the analyser, terminal blocks and internal components.
Wide Measurement Range
Supports measured nominal voltage range from 50Vac to 690Vac.
Self-Powered Ranges
Self-powered voltage ranges include 100 277Vac and 400 500Vac options.
Industrial Temperature Rating
Internal enclosure temperature rating of -20C to +60C.
Dimension Reference
The existing dimension image is retained below for quick visual reference. Final mechanical and mounting checks should be confirmed during project submission, especially where pole diameter, cable entry, CT routing and antenna placement are involved.
Technical Highlights
| Parameter |
Specification / Capability |
| Product Type |
PQube 3 Power Analyzer pre-packaged in rugged pole-mount enclosure |
| Primary Application |
Distribution line monitoring, outdoor feeder monitoring and remote PQube 3 deployment |
| Enclosure |
IP44-rated rugged polycarbonate indoor / outdoor enclosure |
| Mounting |
Stainless steel pole-mount brackets and straps |
| Measured Nominal Voltage |
50 to 690Vac |
| Self-Powered Voltage Range |
100 to 277Vac and 400 to 500Vac |
| Instrument Power |
PQube 3 can be powered from measured voltage or separate instrument power depending on configuration |
| Backup Power |
Up to 1 hour UPS battery backup |
| Current Channels |
Eight current channels |
| Current Sensor Options |
Split-core CT options from 5A to 6000A; flexible CT options up to 3000A |
| Current Input Signal |
333mV or 10V peak through compatible split-core or flexible CTs |
| I/O |
Relay output, analogue inputs and digital input |
| Field Wire Gauge |
Low-voltage inputs / relay outputs / current inputs: 26 12 AWG, 0.14 2.5mm ; voltage / instrument power inputs: 24 10 AWG, 0.2 4mm |
| Humidity |
5% to 90% RH |
| Internal Enclosure Temperature |
-20C to +60C |
| Weight |
Approximately 14lb / 6.4kg |
| Pole Diameter |
Approximately 5in to 14in / 13cm to 36cm |
| Material |
Polycarbonate enclosure with stainless steel clasps and pole-mount bracket |
Update note: The older page listed 100 480Vac as the main input range. Powersides current catalogue indicates a measured nominal voltage range of 50 690Vac, with self-powered voltage ranges of 100 277Vac and 400 500Vac.
Remote Access and Reporting
The pole-mount package is well suited for locations where local access is difficult. With Ethernet or a modem-ready configuration, PQube 3 can provide remote access, automatic email reports and event notifications so engineers can review supply events without visiting the site each time.
- Built-in web access for browser-based data review
- Email event notifications and scheduled reports
- Modem-ready option for remote locations without wired Ethernet
- Optional GNSS / GPS time synchronisation for accurate event timing
- Useful for utility, feeder, remote facility and outdoor monitoring points
Ordering Information
| Option |
Part Number |
Description |
| Base Rugged Pole Model |
PQ3iaB-Rugged-Pole-000-0000-000-XXXX |
PQube 3 rugged pole-mount package in IP44 polycarbonate enclosure |
| Modem-Ready Model |
PQ3iaB-Rugged-Pole-M24-0000-000-XXXX |
Includes internal modem mounting plate, antenna support, internal wiring and 24Vdc modem power; modem not included |
| Modem + GPS / GNSS Sync Ready Model |
PQ3iaB-Rugged-Pole-M24-GPS1-000-XXXX |
Includes modem-ready provisions and GPS / GNSS time synchronisation option depending on final configuration |
Ordering note: Final part numbers may vary by PQube 3 model, CT selection, modem option, GPS / GNSS timing option and regional package. Confirm the final ordering code before quotation or procurement.
Typical Applications
Distribution Line Monitoring
Monitor outdoor distribution feeders for sags, swells, interruptions, harmonics and power events.
Utilities and Substations
Use at substations, utility feeders and outdoor metering points for permanent PQ visibility.
Remote Industrial Sites
Monitor pump stations, plants, depots, remote panels and outdoor electrical infrastructure.
Solar and Renewable Sites
Track PQ and energy behaviour at renewable energy feeders or interconnection points.
Commercial and Critical Buildings
Monitor incoming supply points where wall or pole mounting is easier than panel integration.
Incident Investigation
Deploy for long-term or semi-permanent investigation of supply disturbances affecting equipment.
Why Use the Rugged Pole-Mount Package?
Outdoor power quality monitoring often fails because the analyser is not packaged for the environment. The Rugged Pole-Mount package reduces the need for custom enclosure design and provides a more standard way to deploy PQube 3 at remote or outdoor electrical monitoring points.
- Pre-packaged for outdoor and pole-mounted installation
- Reduces site wiring and enclosure design work
- Supports remote data access and email reporting
- Provides battery backup during interruptions
- Allows monitoring near the actual distribution line or feeder point
- Helps standardise power quality monitoring across multiple remote sites
Integration with IoTWatt 4.0 and Monitoring Systems
The PQube 3 Rugged Pole-Mount package can be used as a high-resolution power quality monitoring point within a wider site monitoring architecture. In IoTWatt 4.0 projects, it can provide PQ event records, waveform evidence and energy trends that complement normal metering and digital energy audit analytics.
- Use PQube 3 event reports for supply disturbance investigation
- Correlate PQ events with equipment operation, energy and production data
- Use remote notifications for faster response to voltage disturbances
- Support EECA, energy audit and critical facility power quality reporting
- Use with IoTWatt 4.0 dashboards, alarms, tickets and site-level visibility where required
PQube 3 Rugged Pole-Mount Supply and Integration
Saturn Pyro supports Powerside PQube 3 Rugged Pole-Mount packages for distribution line monitoring, utilities, substations, remote industrial sites, outdoor feeders, renewable energy sites, power quality investigations and IoTWatt 4.0 monitoring projects in Malaysia.
Enquire Now
More detail about Saturn Pyro Sdn Bhd
Malaysia
